Louis-Philippe Bilodeau
- Total activity 443
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 227
Activity overview
Latest activity by Louis-Philippe Bilodeau-
Louis-Philippe Bilodeau created an article,
Is it necessary to re-grind the product before use?
No. The product is already milled and requires no additional preparation.
-
Louis-Philippe Bilodeau created an article,
Which cartridge types are compatible with the Styloh?
The Styloh is compatible with standard 510 cartridges (10.5 mm) and XL cartridges (13 mm).
-
Louis-Philippe Bilodeau created an article,
What should I do if the Styloh device is damaged?
If the device is damaged, stop using it and keep it dry.
-
Louis-Philippe Bilodeau created an article,
Can I use any charger with the Styloh battery?
No. Chargers delivering more than 5 V should not be used with the Styloh battery.
-
Louis-Philippe Bilodeau created an article,
What does “burn-free technology” mean on the Styloh?
Burn-free technology refers to a heat regulation mechanism designed to limit excessive temperature buildup within the ceramic heating element.
-
Louis-Philippe Bilodeau created an article,
How does the preheat function work on the Styloh?
The preheat function is indicated by the white LED blinking twice. This function initiates a brief heating cycle of the device before operation.
-
Louis-Philippe Bilodeau created an article,
What do the colour indicators mean for power levels on the Styloh?
Blue = 2.6 VYellow = 3.0 VRed = 3.4 V
-
Louis-Philippe Bilodeau created an article,
What does it mean if the LED blinks on the Styloh?
If the LED blinks on the Styloh, it indicates the device’s operating status:White blinking twice = preheat mode.White blinking three times = short-circuit protection.
-
Louis-Philippe Bilodeau created an article,
Which cartridge sizes does Capsulh support?
Capsulh is compatible with two sizes:• Standard 510 cartridges (10.5 mm)• XL 510 cartridges (13 mm)
-
Louis-Philippe Bilodeau created an article,
Can overtightening the cartridge cause issues?
Yes. Overtightening can damage the 510 connection, cause misfires, or create short circuits. Screw the cartridge on gently until it stops do not force.